x

Do’s and Don’ts for Kansas City GFCI Installation

GFCI Installation kansas city

If you need an expert for your Kansas City GFCI installation, you are in good company. A ground-fault circuit interrupter, or a GFCI outlet, is an electrical outlet that keeps track of your electricity flow at all times.

They are necessary for areas of your home where your electricity is very close to water. The GFCI will detect anything out of the ordinary and can protect you from being shocked or an electrical fire.

Do’s and Don’ts for Kansas City GFCI Installation

The very basics of GFCI are finding out if you have any and if they are working. This is not something you should do on your own.

Do

Get an inspection. If this is an older home you have bought or inherited, you should have all the electrical aspects inspected anyhow. The GFCIs need to be tested and checked to ensure they are working.

Get an electrician in to check out your system to see if you need any, have any, and if they are all working. This is something you definitely should leave to the professionals.

Don’t

Don’t start poking around your outlets if you are not completely sure what you are doing. Even if you are familiar with the building, don’t attempt to check things out that you are not trained to do.

Even if you have shut the main power off, there could still be live wires and a current moving through the wires. Keep your hands and tools away from your outlets.

Do

You should have GFCIs installed anywhere in your home where there is access to water or moisture. That would be bathrooms, laundry areas, kitchens, garages, basements, and all your outdoor outlets.

Get a professional to install your Kansas City GFCI for you. Even if you think you know what you are doing, it’s better to be safe. There may be GFCIs installed that are not functioning properly.

Don’t

Kansas City GFCI installation is not something you should undertake on your own. Just because you watched a video on the internet doesn’t make you an expert. You need the advice and guidance of an electrician.

Whether you need to install GFCIs for the first time or you need the old ones replaced, there can always be something that can go wrong. Getting electrocuted is not something you want to tempt.

Do

Regardless of whether your GFCIs are new or existing, they should be tested. To find out if you have them at all, there will be a TEST and RESET button on the outlet panel.

The indicator button will be red. If you push the TEST button, the power source will be interrupted and stop the flow of energy to the circuit. Your TEST button gets activated when there is an issue with the flow of energy.

When you push the RESET button, the indicator light should come back on. If not, there is a problem with your GFCI and you need to call an electrician to investigate further. Don’t try to inspect it yourself.

Kansas City GFCI Installation

Installing GFCIs is a vital part of electrical safety in your home. They need to be anywhere there is moisture or water. It’s a smart idea to have them installed throughout your home.

If you are unsure, don’t take any chances. Give us a call today to get an inspection to make sure your GFCIs are working or if they are even in place. Here at Fusion Electric, we take safety seriously. Fusion Electric is the electrician to call in Kansas City for electrical services.

HUGE SAVINGS WHEN YOU USE THESE FUSION ELECTRIC COUPONS

FREE*

home safety inspection

*Applies to labor only. Must mention coupon at time of service. All repairs and installations require a trip charge of $75. Not valid with other offers.

$30

off any residential service or repair

*Applies to labor only. Must mention coupon at time of service. All repairs and installations require a trip charge of $75. Not valid with other offers.

$50

off panel upgrades

*Applies to labor only. Must mention coupon at time of service. All repairs and installations require a trip charge of $75. Not valid with other offers.

Get Fast, Affordable Electrical
Repair With The Service You Deserve

Same-day Service Available